MEP Shark 332-1 SXI Evo Semi Automatic Bandsaw

MEP Shark 332-1 SXI Evo Semi Automatic Bandsaw

Manufactured in Italy, the MEP Shark 332-1 SXI Evo is a Semi-Automatic hydraulic metal cutting bandsaw built in a cast iron construction to cut from 45° right to 60° left with four modes of operation. Manual, Dynamic, Semi-Automatic and Cycle Down Up.

Manual cycle, the operator clamps material manually and pulls cutting bow down by use of the low voltage handle and lifts back up after the cut.

Dynamic mode, the operator pulls bow down to desired starting point, squeezes the trigger, the vice closes, cut commences hydraulically, after the cut the blade stops, vice opens, and bow returns to where it started.

Semi-Automatic mode, the operator programmes top and bottom position and presses the start button. The vice closes, cut commences hydraulically, after the cut the blade stops, vice opens, and bow returns to the programmed top of stroke position.

The centralised control panel provides all information required by the operator, including alarms, diagnostics, pieces cut, cutting time and blade tension.

 

Blade 3650 x 27 x 0.9mm
Motor Power 1.8kW
Vice Opening 335mm
Round Capacity 260mm
Rectangular Capacity 330 x 250mm
Book Service02 8445 8555
Get in touch with us:


    • Date February 27, 2020
    • Tags MEP Machines, Products
    • URL View Brand