MEP Shark 282 SXI Evo Semi-Automatic Bandsaw

MEP Shark 282 SXI Evo Semi-Automatic Bandsaw

Manufactured in Italy, the Shark 282 SXI Evo is a Semi-Automatic hydraulic metal cutting bandsaw built in a cast iron construction to cut from 45° right to 60° left with four modes of operation; Manual, Dynamic, Semi-Automatic and Cycle Down Up.

Manual cycle, the operator clamps material manually and pulls cutting bow down by use of the low voltage handle and lifts back up after the cut.

Dynamic mode, the operator pulls bow down to desired starting point, squeezes the trigger, the vice closes, cut commences hydraulically, after the cut the blade stops, vice opens, and bow returns to where it started.

Semi-Automatic mode, the operator programmes top and bottom position and presses the start button. The vice closes, cut commences hydraulically, after the cut the blade stops, vice opens, and bow returns to the programmed top of stroke position.

The centralised control panel provides all information required by the operator, including alarms, diagnostics, pieces cut, cutting time and blade tension.

This is a model typically in stock. Contact us for brochure and further specifications.

 

Blade 2950 x 27 x 0.9mm
Motor Power 1.8kW
Vice Opening 285mm
Round Capacity 250mm
Rect. Capacity 280 x 220mm
Book Service02 8445 8555
Get in touch with us:


    • Brand MEP
    • Date February 28, 2020
    • Tags MEP Machines, Products
    • URL View Brand